Volakas marble table leg being turned on the robot

Export · Tapered and cylindrical table legs

Marble Table Legs

Hollow, tapered table legs in Volakas marble: turned on the robot, measured to the millimetre, crated and shipped to Kazakhstan.

Location: Kazakhstan
Year: 2026
Stone: Volakas (Greek marble)
Production: Turned on the robot, checked with callipers
Installation: Delivered ex-works

Project

We made table legs in Volakas marble for an order going to Kazakhstan. The legs are hollow; some are straight cylinders, others taper towards the top. We took the dimensions from the drawing, turned each piece on the robot and checked the wall thickness and diameter one by one with callipers. Then we wrapped them in foam and packed them in wooden crates.

Scope

From drawing to crate

The size is set in the drawing, the work done on the robot, the check made with callipers.

Tapered legHollow, narrowing upwards
Cylindrical legHollow, straight
PackingFoam and wooden crate

Process

From block to building

Measuring, production and inspection by one team.

Model
The leg was drawn with its dimensions on the computer.
Turning on the robot
The block was worked on the rotary table with water cooling.
Measurement check
Wall thickness and diameter were measured with callipers on every piece.
Crating
The pieces were wrapped in foam and placed in wooden crates.